This standard covers open-channel, fabricated-metal slide gates and open- channel, fabricated-metal weir gates for water supply service. This standard also cov. Dear All, Plz share ANSI/AWWA C (AWWA Standard for Open-Channel, Fabricated-Metal Slide Gates and Open-Channel. AWWA C Open-Channel, Fabricated-Metal Slide Gates.
|Published (Last):||12 June 2016|
|PDF File Size:||17.55 Mb|
|ePub File Size:||2.52 Mb|
|Price:||Free* [*Free Regsitration Required]|
Disinfection Of Water Treatment Plants. The design of the body and seat assures non-clogging shutoff on suspended solids in wastewater treatment plants.
Golden Harvest, Inc. Slide Gates Specs
Lifting Mechanism Operators of the types listed in the schedule shall be provided by the gate manufacturer. The manufacturer shall submit for approval by the purchaser, complete engineering design calculations in compliance with AWWA standards latest edition. The frame configuration shall be of the flush-bottom type and shall allow the replacement of the top and side seals without removing the gate frame from the wall.
The stem cover shall have a cap and condensation vents and a clear mylar position indicating tape. Orbinox has 50 awww of experience in designing, manufacturing and marketing knife gate valves, penstocks, dampers, and valves for hydraulic works makes us a global leader in the knife gate valve industry today.
Intended to prevent backflow and commonly installed at the end of a line, as a check valve. Flap Gates round or rectangular Intended to prevent backflow and commonly installed at the end of a line, as a check valve. For more information on valves for your water or wastewater project, contact Customer Service.
Runnalls Industries is proud to be able to offer them to our Ontario customers. Knife Gate Valve, Sizes 2 In.
Seals shall be frame mounted. Designed for open channel installations in waste water treatment plants. Enter your account email address to request a password reset: Gates shall be provided with a yoke to support the operating bench stand. All bearings and gears shall be totally enclosed in a weather tight housing.
Governing Standards Except as modified or supplemented herein, all gates and operators shall conform to the applicable requirements of AWWA-C standards. Land Use and Development. Established inthe American Water Works Association is the oldest and largest nonprofit, scientific and educational organization dedicated to safe and sustainable water in the world.
Grooved And Shouldered Joints. Remember me for one month. Gearboxes shall be provided when required to maintain the operating force below 40 lb. The crank shall be fitted with a corrosion-resistant rotating handle. The fully assembled gates shall be shop inspected, tested for operation and leakage, and adjusted before shipping. Used for on-off or control applications in open channels.
Carbon or stainless steel fabricated construction, with tight sealing by means of elastomer seals. Are you sure you want to empty the cart? Under the design unseating head, leakage shall not exceed 0. The flush bottom resilient neoprene seal shall be mounted to bottom member of the frame Yoke The yoke, to support the operating bench stand, shall be formed by two structural members welded at the top of the guides to provide a one piece rigid frame. Lifting Assemblies Stem and Couplings The operating stem shall be of stainless steel designed to transmit in compression at least 2 times the rated output of the operating manual mechanism with a 40 lb effort on the crank or handwheel.
Stem Guides Stem guides shall be fabricated from stainless steel. Stem Cover Rising stem gates shall be provided with a clear polycarbonate stem cover. Quality Assurance The manufacturer shall have 5 years experience in the production of substantially similar equipment, and shall show evidence of satisfactory operation in at least 10 installations.
AWWA standard for open-channel, fabricated-metal slide gates
Materials and Construction General Design Gates qwwa be either self-contained of the rising stem or non-rising configuration as indicated on the gate schedule. There shall be no assembling or adjusting on the job sites other than for the lifting mechanism. Gates having a width equal to or greater than two times their height shall be provided with two geared lifting mechanisms interconnected by a tandem shaft. Holiday Hours December Available in a wide range of dimensions and for many different pressure heads.
C5113 water level is controlled by adding or removing logs. Wall Penstock Square or rectangular port sliding wall penstocks sealed on all 4 sides. Available in a range of diameter sizes. Seals shall be fully adjustable. Stop Logs Steel, aluminum Designed for open channel installations in waste water treatment awwz.
Channel penstocks Square or rectangular sliding channel gate, with fixed parts embedded in concrete and seals on 3 sides.
With more than 50, members worldwide and 43 Sections in North America, AWWA advances public health, c53 and welfare by uniting the efforts of the entire water community. Register for a trial account. Gates and operators shall be supplied with all the necessary parts and accessories indicated on the drawings, specified, or otherwise required for a awda, properly operating installation, and shall be the latest standard product of a manufacturer regularly engaged in the production of fabricated gates.
General Design Gates shall be either self-contained of the rising stem c13 non-rising configuration as indicated on the gate schedule. Square or rectangular sliding channel gate, with fixed parts embedded in concrete and seals on 3 sides. Guide frame shall not weigh less than 9 lbs.
Designed for downward opening applications where a more accurate flow control is required. Geared operators shall be furnished with a threaded bronze lift nut to engage the threaded portion of the stem.
Enter your personal account email address to request a password reset: The logs are stacked on top of each other in the frame guides.